|
 |
| DA00223 | $875.00 |  | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel and rocker panels - one piece (D-1462Y) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00227 | $689.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel - one piece (D-1462X) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00214 | $875.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel and rocker panels - one piece (D-1462YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00216 | $689.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel - one piece (D-1462XA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00217 | $279.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino one piece Floor Pan - (D-1462) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00200 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00201 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00202 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00203 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00204 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00205 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00206 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00207 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00210 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00208 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00209 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino 4 speed Tunnel, manual transmission only w/o console (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
 |
| DA00218 | $79.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, & Malibu (2 door or 4 door) Rear Seat Panel (D-1462L) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00219 | $85.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461Y) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00228 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00220 | $85.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - CENTER (D-1461Z) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00229 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461ZA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00221 | $85.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - REAR (D-1461X) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00222 | $2.50 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu, and El Camino Galvanized Floor Plug - each |
|
|
| |
| DB00200 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00201 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00202 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00203 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00200 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) LH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00201 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) RH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00202 | $249.00 | | | 1978-1987 El Camino LH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00203 | $249.00 | | | 1978-1987 El Camino RH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20022 | $199.00 | | | 1970-1972 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20023 | $199.00 | | | 1970-1972 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20022 | $160.00 | | | 1976-1977 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20023 | $160.00 | | | 1976-1977 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20225 | $69.99 | | | 1981-1988 Monte Carlo LH Quarter panel REAR patch panel - new - reproduction (Made in the USA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20226 | $69.99 | | | 1981-1988 Monte Carlo RH Quarter panel REAR patch panel - new - reproduction (Made in the USA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20227 | $59.00 | | | 1981-1988 Monte Carlo LH Quarter panel FRONT patch panel - new - reproduction (Made in the USA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20228 | $59.00 | | | 1981-1988 Monte Carlo RH Quarter panel FRONT patch panel - new - reproduction (Made in the USA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20125 | $399.00 | | | 1981-1988 Monte Carlo LH Quarter panel skin - (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20126 | $399.00 | | | 1981-1988 Monte Carlo RH Quarter panel skin - (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20123 | $695.00 | | | 1981-1988 Monte Carlo LH Quarter panel - OEM - (100%) - no factory primer - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20124 | $299.00 | | | 1981-1988 Monte Carlo LH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20024 | $299.00 | | | 1981-1988 Monte Carlo RH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20021 | $1,399.00 | | | 1981-1988 Monte Carlo Super Rust Repair kit (Includes some used and some new reproduction parts) - Includes DM20024 & DM20124 quarter panels & wheel houses; DM00200 & DM00201 floor pans, DM30147 & DM30148 Rocker panels, DM30141, DM30142, DM30143, DM30144 Inner and Outer door bottoms - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20070 | $379.00 | | | 1968-1972 El Camino LH quarter panel (100% style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20071 | $379.00 | | | 1968-1972 El Camino RH quarter panel (100% style) - new - excellent reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20070 | $160.00 | | | 1973-1977 El Camino LH quarter panel (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20071 | $160.00 | | | 1973-1977 El Camino RH quarter panel (80% style) - new - reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20270 | $429.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel (100% OEM style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20271 | $429.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel (100% OEM style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20070 | $269.00 | | | 1978-1987 El Camino LH quarter panel (80% style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20071 | $269.00 | | | 1978-1987 El Camino RH quarter panel (80% style) - new - excellent reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20272 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel REAR patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20273 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel REAR patch panel(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20274 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel FRONT patch panel(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20275 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel FRONT patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20276 | $149.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel outer wheel housing (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20277 | $149.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel outer wheel housing (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM21161 | $239.00 | | | 1978-1987 NEW ITEM!!! El Camino front bed panel under rear window - new reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM21162 | $499.00 | | | 1978-1987 NEW ITEM!!! El Camino complete bed floor - new reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM21160 | $379.00 | | | 1978-1987 El Camino Tailgate ( steel ) - reproduction - NEW (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM21260 | $399.00 | | | 1978-1987 El Camino Tailgate ( steel ) - used - It includes all handles and latching mechanisms and tag pocket and hinges. - (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20117 | $649.00 | | | 1978-1987 El Camino smooth fiberglass tailgate without license plate cutout(Has steel inner frame so it can mount to original hardware for direct factory bolt on. Cormat reinforced for sturdy const.) |
|
|
| |
| DM21360 | $299.00 | | | 1978-1983 Malibu Wagon Tailgate (steel) - used - It includes all handles and latching mechanisms and tag pocket and hinges. - (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20125 | $399.00 | | | 1968 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (D-1475N) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20126 | $399.00 | | | 1968 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (D-1475M) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20127 | $399.00 | | | 1969 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (D-1475K) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20128 | $399.00 | | | 1969 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (D-1475J) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20129 | $399.00 | | | 1970-1972 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (GS-QP03-70LOE or D-1475) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20130 | $399.00 | | | 1970-1972 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (GS-QP03-70ROE or D-1474) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20135 | $99.00 | | | 1970-1972 Chevelle and Malibu Coupe quarter skin - LH - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20136 | $99.00 | | | 1970-1972 Chevelle and Malibu Coupe quarter skin - RH - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20125 | $160.00 | | | 1973-1977 Chevelle LH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20126 | $160.00 | | | 1973-1977 Chevelle RH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20129 | $399.00 | | | 1978-1983 Malibu - 2 door - LH Quarter panel skin - (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20130 | $399.00 | | | 1978-1983 Malibu - 2 door - RH Quarter panel skin - (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30147 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
 |
| DA30148 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30149 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30150 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30147 | $49.00 | | | 1978-1988 Monte Carlo LH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30148 | $49.00 | | | 1978-1988 Monte Carlo RH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30149 | $39.00 | | | 1978-1987 El Camino & Malibu LH Rocker panel - 2 door(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30150 | $39.00 | | | 1978-1987 El Camino & Malibu RH Rocker panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10122 | $339.00 | | | 1968 Chevelle & El Camino LH Fender reproduction (D-1479B) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10123 | $339.00 | | | 1968 Chevelle & El Camino RH Fender reproduction (D-1479A) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10124 | $339.00 | | | 1969 Chevelle & El Camino LH Fender reproduction (D-1479D) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10125 | $339.00 | | | 1969 Chevelle & El Camino RH Fender reproduction (D-1479C) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10126 | $269.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) LH - Fender (D-1481) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10127 | $269.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) RH - Fender (D-1480) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10130 | $329.00 | | | 1970 Chevelle Wagon /El Camino LH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
| |
| DA10131 | $329.00 | | | 1970 Chevelle Wagon /El Camino RH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10230 | $49.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) Front fender extension - LH (GS-FE03-70EL) |
|
|
 |
| DA10231 | $49.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) Front fender extension - RH (GS-FE03-70ER) |
|
|
| |
| DA10232 | $49.00 | | | 1970 Chevelle Wagon /El Camino Front fender extension - LH (GS-FE03-701EL) |
|
|
| |
| DA10233 | $49.00 | | | 1970 Chevelle Wagon /El Camino Front fender extension - RH (GS-FE03-701ER) |
|
|
| |
| DA10365 | $19.95 | | | 1970 Chevelle /El Camino Fender Extension Hardware Kit ( 34 pieces ) |
|
|
 |
| DA10128 | $269.00 | | | 1971-1972 Chevelle and Malibu ( except Wagon /El Camino / Sprint ) LH - Fender (D-1483) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10129 | $269.00 | | | 1971-1972 Chevelle and Malibu ( except Wagon /El Camino / Sprint ) RH - Fender (D-1482) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10132 | $329.00 | | | 1971-1972 Chevelle Wagon /El Camino / Sprint LH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10133 | $329.00 | | | 1971-1972 Chevelle Wagon /El Camino / Sprint RH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10330 | $199.00 | | | 1971-1972 Chevelle and Malibu Front fender extension - LH (GS-FE03-71EL) |
|
|
| |
| DA10331 | $199.00 | | | 1971-1972 Chevelle and Malibu Front fender extension - RH (GS-FE03-71ER) |
|
|
| |
| DA10166 | $5.95 | | | 1971-1972 Chevelle /El Camino Fender Extension Hardware Kit ( 12 pieces ) |
|
|
| |
| DA10167 | $5.95 | | | 1971-1972 Chevelle /El Camino Fender Extension Top Bracket Hardware Kit (4-pieces) |
|
|
| |
| DA10136 | $22.00 | | | 1970-1972 Chevelle and Malibu (except Wagon/El Camino/Sprint) LH Lower rear fender Patch Panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10137 | $22.00 | | | 1970-1972 Chevelle and Malibu (except Wagon/El Camino/Sprint) RH Lower rear fender Patch Panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10031 | CALL | | | 1986-1988 Monte Carlo LH LS fender front patch panel - Made to recreate LS fenders from standard Monte Carlo fender. |
|
|
| |
| DM10032 | CALL | | | 1986-1988 Monte Carlo RH LS fender - front patch panel - Made to recreate LS fenders from standard Monte Carlo fender. |
|
|
 |
| DM10033 | CALL | | | 1986-1988 Monte Carlo LS LH fender - New - NOT for SS or standard Monte Carlo (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) - {CURRENTLY OUT OF STOCK} |
|
|
 |
| DM10034 | CALL | | | 1986-1988 Monte Carlo LS RH fender - New - NOT for SS or standard Monte Carlo(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) (Currently out of stock) |
|
|
| |
| DM10333 | $1,500.00 | | | 1981-1988 Monte Carlo LH & RH fender set - OEM - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10035 | $159.00 | | | 1981-1988 Monte Carlo LH fender - New reproduction - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10036 | $159.00 | | | 1981-1988 Monte Carlo RH fender - New reproduction - not for Monte Carlo LS (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10162 | CALL | | | 1981-1988 Monte Carlo LH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10163 | CALL | | | 1981-1988 Monte Carlo RH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10137 | $149.00 | | | 1980 Monte Carlo LH fender - used (when available) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10138 | CALL | | | 1980 Monte Carlo RH fender - used (when available)(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10171 | $99.00 | | | 1978-1981 SALE!!! El Camino & Malibu LH Fender - reproduction (Limited supply while supply last!) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10172 | $99.00 | | | 1978-1981 SALE!!! El Camino & Malibu RH Fender - reproduction (Limited supply while supply last!) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10471 | $199.00 | | | 1978-1981 El Camino & Malibu LH Fender - reproduction - THESE ARE NEW BETTER QUALITY WITH HEAVIER METAL. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10472 | $199.00 | | | 1978-1981 El Camino & Malibu RH Fender - reproduction - THESE ARE NEW BETTER QUALITY WITH HEAVIER METAL. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10571 | $199.00 | | | 1982-1987 El Camino & Malibu LH Fender - reproduction - THESE ARE NEW BETTER QUALITY WITH HEAVIER METAL. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10572 | $199.00 | | | 1982-1987 El Camino & Malibu RH Fender - reproduction - THESE ARE NEW BETTER QUALITY WITH HEAVIER METAL. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20131 | $185.00 | | | 1968-1969 Chevelle and Malibu taillamp panel with brackets (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20132 | $129.00 | | | 1970-1972 Chevelle and Malibu taillamp panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20133 | $65.00 | | | 1970 Chevelle and Malibu rear valance panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20134 | $65.00 | | | 1971-1972 Chevelle and Malibu rear valance panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20251 | $169.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Trunk lid - new reproduction - black factory primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20351 | $75.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Trunk lid - used (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20352 | $46.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo Deck lid filler panel - new reproduction - black factory primer (D-1489C)(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20353 | $64.00 | | | 1970-1972 Chevelle, Malibu Convertible Deck lid filler panel - new reproduction - black factory primer (D-1489M)(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20150 | $299.00 | | | 1978-1980 Monte Carlo Trunk Lid - used - aluminum - when avail. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20151 | $299.00 | | | 1978-1983 Malibu - 2 door - Trunk Lid - used - when avail. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20251 | $499.00 | | | 1981-1988 Monte Carlo Trunk Lid - USED - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20051 | $599.00 | | | 1983-1988 Monte Carlo SS Trunk Lid - Used - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20052 | $499.00 | | | 1986-1987 Sale!!! (Normally $599, now on sale for $499 for a limited time) Monte Carlo SS Aerocoupe Trunk Lid - Used - when available (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20053 | $999.00 | | | 1986-1987 Sale!!! (Normally $1199, now on sale for $999 for a limited time) Monte Carlo SS Aerocoupe Trunk Lid - New - OEM - Limited Supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA40002 | $79.00 | | | 1968-1972 Chevelle, Malibu, El Camino, Monte Carlo lower windshield channel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM40008 | $399.00 | | | 1981-1988 Monte Carlo Hard Top Roof panel - NEW - OEM - Limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30001 | $329.00 | | | 1968 Chevelle and Malibu Door Shell LH - new - reproduction (D-1485D) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30011 | $149.00 | | | 1968 Chevelle and Malibu Door Skin LH - new - reproduction (D-1487D) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30002 | $329.00 | | | 1968 Chevelle and Malibu Door Shell RH - new - reproduction (D-1485C) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30012 | $149.00 | | | 1968 Chevelle and Malibu Door Skin RH - new - reproduction (D-1487C) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30003 | $329.00 | | | 1969 Chevelle and Malibu Door Shell LH - new - reproduction (D-1485F) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30013 | $149.00 | | | 1969 Chevelle and Malibu Door Skin LH - new - reproduction (D-1487F) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30004 | $329.00 | | | 1969 Chevelle and Malibu Door Shell RH - new - reproduction (D-1485E) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30014 | $149.00 | | | 1969 Chevelle and Malibu Door Skin RH - new - reproduction (D-1487E) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30005 | $329.00 | | | 1970-1972 Chevelle and Malibu Door Shell LH - new - reproduction (D-1485M) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30015 | $149.00 | | | 1970-1972 Chevelle and Malibu Door Skin LH - new - reproduction (D-1487) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30006 | $329.00 | | | 1970-1972 Chevelle and Malibu Door Shell RH - new - reproduction (D-1485L) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30016 | $149.00 | | | 1970-1972 Chevelle and Malibu Door Skin RH - new - reproduction (D-1486) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30007 | $42.07 | | | 1968 Chevelle convertible door Alignment wedges (Trim Parts 4578) |
|
|
 |
| DM30141 | $39.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu LH Inner door bottom panel 2-door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30142 | $39.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu RH Inner door bottom panel 2-door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30143 | $45.00 | | | 1981-1988 Monte Carlo LH Outer lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30144 | $45.00 | | | 1981-1988 Monte Carlo RH Outer lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30145 | $45.00 | | | 1978-1987 El Camino & Malibu (2 door) LH lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30146 | $45.00 | | | 1978-1987 El Camino & Malibu (2 door) RH lower 11" of door skin patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30742 | $249.00 | | | 1978-1980 Monte Carlo RH door. Roll up window and manual locks. Straight door with very minor rust in 3" of pinch weld at very front. Bottom of doors and drain holes are very solid. Still a very solid door. Perfect outer skin. (Interior door panels, exterior aluminum trim, and door mirrors are NOT included.) (only one left) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM30744 | $999.00 | | | 1981-1985 Monte Carlo SS (will fit on a standard Monte Carlo) LH & RH used doora. Comes will all latches, handles, door glass, and window regulators. Doors has power windows and locks. (Interior door panels, exterior aluminum trim, and door mirrors are NOT included.) (only one set) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM30239 | CALL | | | 1978-1988 Monte Carlo, SS, or LS, El Camino, and Malibu used doors. LH or RH. Rust free and straight. Comes will all latches, handles, door glass, and window regulators. Interior door panels and door mirrors are NOT included. Inquire. (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10157 | $199.00 | | | 1978-1987 El Camino & Malibu Hood - reproduction (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10057 | $199.00 | | | 1981-1988 Monte Carlo Hood - reproduction (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10058 | $199.00 | | | 1981-1988 Monte Carlo Stock Hood - used (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM10358 | $199.00 | | | 1978-1987 El Camino & Malibu Stock Hood - used (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10026 | $399.00 | | | 1978-1987 OVERSTOCK SALE!!! El Camino & Malibu 2" Cowl Induction Hood - Steel (GM Restoration part by Good Mark) (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM10025 | $399.00 | | | 1981-1988 OVERSTOCK SALE!!! Monte Carlo or Monte Carlo SS 2" Cowl Induction Hood - Steel (Normally $449...Limited quantity for this year) (There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10259 | $315.00 | | | 1968-1969 Chevelle, Malibu, and El Camino SS 396 Hood ( will fit 68 if 69 hinges are used) (GS-HO03-69 or D-1469)) (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10260 | $385.00 | | | 1968-1969 Chevelle, Malibu, and El Camino SS 2" Cowl Hood ( will fit 68 if 69 hinges are used) (GS-HO03-691) (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10261 | $309.00 | | | 1970-1972 Chevelle, Malibu, and El Camino Heavy Chevy / SS / Sprint Cowl Hood (non functional) (D-1470 or GS-HO03-70) (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10262 | $309.00 | | | 1970-1972 Chevelle, Malibu, and El Camino SS / Sprint (functional cowl induction) hood (D-1471 or GS-HO03-701) (Ships motor freight. There is a $20 crate fee also added to the cost of freight. Freight will be figured at the residential rate at the time of order. Shipping rate will be adjusted based on if it is a commercial delivery, residential delivery, or a remote area such as ND, SD or a high security area such as NY.) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
