|
 |
| DA00223 | $875.00 |  | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel and rocker panels - one piece (D-1462Y) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00227 | $689.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel - one piece (D-1462X) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00214 | $875.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel and rocker panels - one piece (D-1462YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00216 | $689.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Complete Floor Pan package with rear seat panel - one piece (D-1462XA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00217 | $279.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino one piece Floor Pan - (D-1462) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00200 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00201 | $95.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - taiwan made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00202 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00203 | $139.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Floor Pan - full length - USA made (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00204 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00205 | $59.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00206 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00207 | $39.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
| |
| DA00210 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00208 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section under rear seat (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA00209 | $69.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino 4 speed Tunnel, manual transmission only w/o console (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved.) |
|
|
 |
| DA00218 | $79.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, & Malibu (2 door or 4 door) Rear Seat Panel (D-1462L) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00219 | $85.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461Y) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00228 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461YA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00220 | $85.00 | | | 1968-1969 Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - CENTER (D-1461Z) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00229 | $112.00 | | | 1970-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - FRONT (D-1461ZA) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00221 | $85.00 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu (2 door or 4 door), & El Camino Under floor support - REAR (D-1461X) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA00222 | $2.50 | | | 1968-1972 Monte Carlo, Monte Carlo SS, Chevelle, Malibu, and El Camino Galvanized Floor Plug - each |
|
|
| |
| DB00200 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00201 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Front Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00202 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino LH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB00203 | $95.00 | | | 1973-1977 Monte Carlo, Chevelle, Malibu (2 door or 4 door), & El Camino RH Rear Floor Section (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00200 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) LH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00201 | $249.00 | | | 1978-1988 Monte Carlo, Monte Carlo SS, & Malibu (2 door or 4 door) RH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00202 | $249.00 | | | 1978-1987 El Camino LH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM00203 | $249.00 | | | 1978-1987 El Camino RH Floor Pan - full length (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20022 | $199.00 | | | 1970-1972 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA20023 | $199.00 | | | 1970-1972 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20022 | $160.00 | | | 1976-1977 Monte Carlo LH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20023 | $160.00 | | | 1976-1977 Monte Carlo RH Quarter panel - reproduction - (80%) - factory type black primer (Has to be modified for side marker to fit 73-75) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20125 | $175.00 | | | 1981-1988 Monte Carlo LH Quarter panel skin - (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20126 | $175.00 | | | 1981-1988 Monte Carlo RH Quarter panel skin - (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20123 | $795.00 | | | 1981-1988 Monte Carlo LH Quarter panel - OEM - (100%) - no factory primer - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20124 | $299.00 | | | 1981-1988 Monte Carlo LH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20024 | $299.00 | | | 1981-1988 Monte Carlo RH Quarter panel with inner and outer wheel well - used - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20021 | $1,399.00 | | | 1981-1988 Monte Carlo Super Rust Repair kit (Includes some used and some new reproduction parts) - Includes DM20024 & DM20124 quarter panels & wheel houses; DM00200 & DM00201 floor pans, DM30147 & DM30148 Rocker panels, DM30141, DM30142, DM30143, DM30144 Inner and Outer door bottoms - limited supply (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20070 | $379.00 | | | 1968-1972 El Camino LH quarter panel (100% style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20071 | $379.00 | | | 1968-1972 El Camino RH quarter panel (100% style) - new - excellent reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20070 | $160.00 | | | 1973-1977 El Camino LH quarter panel (80% style) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20071 | $160.00 | | | 1973-1977 El Camino RH quarter panel (80% style) - new - reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20270 | $429.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel (100% OEM style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20271 | $429.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel (100% OEM style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20070 | $269.00 | | | 1978-1987 El Camino LH quarter panel (80% style) - new - excellent reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20071 | $269.00 | | | 1978-1987 El Camino RH quarter panel (80% style) - new - excellent reproduction(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20272 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel REAR patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20273 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel REAR patch panel(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20274 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel FRONT patch panel(SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20275 | $69.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel FRONT patch panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20276 | $149.00 | | | 1978-1987 !!! NEW !!! El Camino LH quarter panel outer wheel housing (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20277 | $149.00 | | | 1978-1987 !!! NEW !!! El Camino RH quarter panel outer wheel housing (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM21161 | $239.00 | | | 1978-1987 NEW ITEM!!! El Camino front bed panel under rear window - new reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM21162 | $499.00 | | | 1978-1987 NEW ITEM!!! El Camino complete bed floor - new reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM21160 | $379.00 | | | 1978-1987 El Camino Tailgate ( steel ) - reproduction - NEW (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20125 | $399.00 | | | 1968 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (D-1475N) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20126 | $399.00 | | | 1968 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (D-1475M) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20127 | $399.00 | | | 1969 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (D-1475K) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20128 | $399.00 | | | 1969 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (D-1475J) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20129 | $399.00 | | | 1970-1972 Chevelle and Malibu Coupe factory style quarter panel - LH - reproduction (GS-QP03-70LOE or D-1475) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20130 | $399.00 | | | 1970-1972 Chevelle and Malibu Coupe factory style quarter panel - RH - reproduction (GS-QP03-70ROE or D-1474) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20135 | $99.00 | | | 1970-1972 Chevelle and Malibu Coupe quarter skin - LH - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA20136 | $99.00 | | | 1970-1972 Chevelle and Malibu Coupe quarter skin - RH - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DB20125 | $160.00 | | | 1973-1977 Chevelle LH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DB20126 | $160.00 | | | 1973-1977 Chevelle RH Quarter panel - reproduction - (80%) - factory type black primer (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20129 | $170.00 | | | 1978-1983 Malibu - 2 door - LH quarter panel skin (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM20130 | $170.00 | | | 1978-1983 Malibu - 2 door - RH quarter panel skin (70% style, good for patch panel, not a true quarter panel, wheel well opening deviates from stock slightly) - new - reproduction (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20173 | CALL | | | 1978-1983 Malibu - 2 door - LH quarter panel includes inner and outer wheel housing - used (out of stock at this time) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DM20174 | CALL | | | 1978-1983 Malibu - 2 door - RH quarter panel includes inner and outer wheel housing - used (out of stock at this time) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30147 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
 |
| DA30148 | $79.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH outer Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30149 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo LH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA30150 | $49.00 | | | 1968-1972 Chevelle, Malibu, and Monte Carlo RH inner Rocker Panel - 2 door (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30147 | $49.00 | | | 1978-1988 Monte Carlo LH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DM30148 | $49.00 | | | 1978-1988 Monte Carlo RH Rocker panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
|
