|
 |
| DM10546 | $89.00 |  | | 1983-1988 NEW ITEM !!! Monte Carlo SS Top Plate filler panels. A great way to dress up your Monte Carlo SS and hide all of the ugly headlight and park light wiring and bumper and absorbers. Cleans up the appearance under the hood. A must for every Monte Carlo SS. (Made in the USA) |
|
|
 |
| DM10646 | $119.00 | | | 1983-1988 NEW ITEM !!! Monte Carlo SS Top Plate (or center plate) Cover. This is a cover plate for the top plate that is hard to change out. If your plate is holding the nose up, this cover plate is easier to put on and less expensive than changing the factory top plate. You can have a good looking top plate in 5 minutes with this new cover plate. Just remove the four rear bolts and a few of the plastic rivet fasteners, slide the plate in and refasten back down. Works well with DM10546 as well. - New - aftermarket (Made in the USA) |
|
|
| |
| DM10846 | $179.00 | | | 1983-1988 NEW ITEM !!! Monte Carlo SS Top Plate (or center plate). Items are made of mild steel and painted satin black. Get rid of that pitted rusty plate and clean up the appearance under the hood. A must for every Monte Carlo SS. (Made in the USA) |
|
|
 |
| DM10746 | $259.00 | | | 1983-1988 NEW ITEM !!! Monte Carlo SS Top Plate filler panels and center plate combo (DM10546 and DM10846). A great way to dress up your Monte Carlo SS and hide all of the ugly headlight and park light wiring and bumper and absorbers. Also includes a new top plate. These items are made of mild steel and painted satin black. Cleans up the appearance under the hood. A must for every Monte Carlo SS. (Made in the USA) |
|
|
 |
| DM10046 | $299.00 | | | 1983-1988 Monte Carlo SS Top plate - air tunnel facia support - OEM (Limited supply) |
|
|
 |
| DM10246 | $219.00 | | | 1983-1988 Monte Carlo SS Top plate - air tunnel facia support - stainless steel reproduction - black powder coated |
|
|
 |
| DM10346 | $195.00 | | | 1983-1988 Monte Carlo SS Top plate - air tunnel facia support - stainless steel reproduction - bare stainless steel |
|
|
| |
| DM60061 | $25.00 | | | 1983-1988 Monte Carlo SS Lower air tunnel facia support RUBBER SEAL (R-MT109) |
|
|
 |
| DM10047 | $199.00 | | | 1983-1988 SALE!!! Monte Carlo SS LOWER - air tunnel facia support - OEM (Normally $249, on sale for a limited time of $199)(while supplies last) |
|
|
 |
| DM10447 | $99.00 | | | 1983-1988 Monte Carlo SS LOWER - air tunnel facia support - USED |
|
|
| |
| DM10048 | $449.00 | | | 1983-1988 SALE!!! Monte Carlo SS air tunnel facia support set (includes top plate DM10046 and bottom shroud DM10047) - new - OEM - (while supplies last) |
|
|
| |
| DM10348 | CALL | | | 1983-1988 Monte Carlo SS air tunnel facia support set - used - when avail. |
|
|
| |
| DM10184 | $249.00 | | | 1983-1988 Monte Carlo SS air tunnel facia support bottom & top set - reproduction (made of fiberglass - see DM10116 for picture) |
|
|
 |
| DM10049 | $599.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu Radiator support - NEW - OEM (Limited Supply - less than 6 left) |
|
|
| |
| DM10050 | CALL | | | 1978-1988 Monte Carlo, El Camino, & Malibu Radiator support - used (limited supply) |
|
|
 |
| DM10150 | $49.00 | | | 1978-1988 Monte Carlo, El Camino, & Malibu radiator support air deflector (limited OEM supply) |
|
|
| |
| DM10186 | $59.00 | | | 1981-1988 Monte Carlo center support - used - (Limited supply) |
|
|
| |
| DA10464 | $449.00 | | | 1968-1971 Griffin High Performance all Aluminum Radiator made to cool 450hp |
|
|
| |
| DB10464 | $449.00 | | | 1972-1977 Griffin High Performance all Aluminum Radiator made to cool 450hp |
|
|
 |
| DM10364 | $449.00 | | | 1978-1988 Griffin High Performance all Aluminum Radiator made to cool 450hp |
|
|
| |
| DA10564 | $499.00 | | | 1968-1971 Griffin High Performance all Aluminum Radiator made to cool 650hp |
|
|
| |
| DB10564 | $499.00 | | | 1972-1977 Griffin High Performance all Aluminum Radiator made to cool 650hp |
|
|
 |
| DM10464 | $499.00 | | | 1978-1988 Griffin High Performance all Aluminum Radiator made to cool 650hp |
|
|
| |
| DA10164 | $189.00 | | | 1968-1971 New Radiator 3 core V8 small block with A/C - OEM style - aftermarket made |
|
|
| |
| DB10064 | $135.00 | | | 1972-1977 New Radiator 3 core V8 small block with A/C - OEM style - aftermarket made |
|
|
| |
| DM10064 | $119.00 | | | 1978-1988 New Radiator 3 core V8 small block with A/C - OEM style - aftermarket made - Aluminum 3 core and plastic tanks |
|
|
 |
| DM10564 | $199.00 | | | 1978-1988 New Radiator 2 core V8 small block with A/C - OEM style - aftermarket made - Copper 2 core and brass tanks |
|
|
 |
| DA10153 | $85.00 | | | 1968 Radiator Fan Shroud for big block |
|
|
 |
| DA10154 | $69.00 | | | 1968-1972 7 Blade Fan made to be used with a fan clutch |
|
|
 |
| DA10174 | $25.00 | | | 1968-1972 Radiator bridge plate for small block |
|
|
| |
| DM10065 | $9.00 | | | 1978-1988 Radiator Cap - 15lb. |
|
|
 |
| DM10052 | $85.00 | | | 1978-1988 Fan shroud - V8 - upper - new |
|
|
 |
| DM10053 | $85.00 | | | 1978-1988 Fan shroud - V8 - lower - new |
|
|
 |
| DM10154 | $165.00 | | | 1978-1988 Fan shroud - V8 - upper and lower - new |
|
|
| |
| DM10153 | $9.00 | | | 1978-1988 Radiator retainer pad |
|
|
| |
| DM10054 | CALL | | | 1978-1988 Fan shroud - complete - used |
|
|
| |
| DM10066 | $179.00 | | | 1978-1988 Monte Carlo, El Camino, and Malibu A/C condensor - aftermarket |
|
|
