|
 |
| DA10403 | $26.00 |  | | 1968-1969 Chevelle LH front wheel well opening molding - (D-M1325) |
|
|
 |
| DA10404 | $26.00 | | | 1968-1969 Chevelle LH front wheel well opening molding - (D-M1324) |
|
|
 |
| DA20262 | $26.00 | | | 1968-1969 Chevelle LH rear wheel well opening molding - (D-M1327) |
|
|
 |
| DA20263 | $26.00 | | | 1968-1969 Chevelle RH rear wheel well opening molding - (D-M1326) |
|
|
| |
| DA10401 | $26.00 | | | 1970-1972 Chevelle LH front wheel well opening molding - (D-M1329) |
|
|
 |
| DA10402 | $26.00 | | | 1970-1972 Chevelle LH front wheel well opening molding - (D-M1328) |
|
|
 |
| DA20260 | $26.00 | | | 1970-1972 Chevelle LH rear wheel well opening molding - (D-M1331) |
|
|
 |
| DA20261 | $26.00 | | | 1970-1972 Chevelle RH rear wheel well opening molding - (D-M1330) |
|
|
| |
| DA10138 | $24.95 | | | 1968-1972 Chevelle Front Fender Moldings LH / RH pair (fits upper rear corner W/seals) |
|
|
 |
| DA10139 | $54.00 | | | 1968 Chevelle and Maibu Eyebrow Fender moldings ( LH/RH pair) - (D-M1417) |
|
|
 |
| DA10140 | $49.95 | | | 1969 Chevelle SS-396 /300 Deluxe Eyebrow Moldings ( LH/RH pair ) - (D-M1419) |
|
|
 |
| DA10141 | $94.00 | | | 1969 Chevelle Maibu / Concours Eyebrow Fender molding (long) ( LH and RH pair ) (D-1419A) |
|
|
 |
| DA10160 | $17.00 | | | 1970-1972 Chevelle and Malibu Upper Rear Fender molding - LH and RH pair - (D-M1421) |
|
|
| |
| DA10142 | $7.50 | | | 1970-1972 Chevelle / El Camino Front Fender Braces ( use 2 ) |
|
|
 |
| DA10143 | $30.33 | | | 1969-1972 Chevelle / El Camino SS Fender Emblems in White ( Sold as a pair. Need 2 pair per car.) (Trim Parts 4620) |
|
|
 |
| DA12143 | $15.00 | | | 1969-1972 Chevelle / El Camino SS Fender Emblems in White ( Sold as a pair. Need 2 pair per car.) (Limited Supply) (EM1304) |
|
|
 |
| DA11143 | $30.33 | | | 1969-1972 Chevelle / El Camino SS Fender Emblems in Black ( Sold as a pair. Need 2 pair per car.) (Trim Parts 4621) |
|
|
| |
| DA10144 | $70.00 | | | 1969-1970 Chevelle / El Camino SS-396 "396" Front Fender Emblem ( 2-per car) |
|
|
| |
| DA10145 | $29.95 | | | 1970-1972 Chevelle / El Camino SS-454 "454" Front Fender Emblems LH/RH pair |
|
|
 |
| DA16017 | $73.47 | | | 1968 Chevelle " Malibu " Front Fender Emblem ( sold as a pair ) (Trim Parts 4530) |
|
|
 |
| DA16018 | $73.47 | | | 1970 Chevelle " Malibu " Front Fender Emblem ( sold as a pair ) (Trim Parts 4673) |
|
|
 |
| DA10146 | $73.47 | | | 1971-1972 Chevelle " Malibu " Front Fender Emblem ( sold as a pair ) (Trim Parts 4735) |
|
|
 |
| DA11145 | $54.67 | | | 1970 Chevelle Malibu Front Fender Emblem "307" ( sold as a pair ) (Trim Parts 4650) |
|
|
 |
| DA11146 | $54.67 | | | 1970-1972 Chevelle Malibu Front Fender Emblem "350" ( sold as a pair ) (Trim Parts 4651) |
|
|
 |
| DA11147 | $54.67 | | | 1970-1971 Chevelle Malibu Front Fender Emblem "400" ( sold as a pair ) (Trim Parts 4652) |
|
|
 |
| DA11148 | $37.80 | | | 1970-1972 Chevelle / El Camino Front Fender Emblem "454" ( sold as a pair ) (Trim Parts 4700) |
|
|
 |
| DA11160 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "0" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185C) |
|
|
 |
| DA11162 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "2" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185D) |
|
|
 |
| DA11163 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "3" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185E) |
|
|
 |
| DA11164 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "4" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185A) |
|
|
 |
| DA11165 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "5" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185B) |
|
|
 |
| DA11166 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "6" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185F) |
|
|
 |
| DA11167 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "7" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185G) |
|
|
 |
| DA11168 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "8" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185J) |
|
|
 |
| DA11169 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "9" Individual placement number in Black. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5185H) |
|
|
 |
| DA11170 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "0" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186C) |
|
|
 |
| DA11172 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "2" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186D) |
|
|
 |
| DA11173 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "3" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186E) |
|
|
 |
| DA11174 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "4" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186A) |
|
|
 |
| DA11175 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "5" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186B) |
|
|
 |
| DA11176 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "6" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186F) |
|
|
 |
| DA11177 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "7" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186G) |
|
|
 |
| DA11178 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "8" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186J) |
|
|
 |
| DA11179 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "9" Individual placement number in White. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186H) |
|
|
 |
| DA11180 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "0" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186C) |
|
|
 |
| DA11181 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "2" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186D) |
|
|
| |
| DA11182 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "3" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186E) |
|
|
 |
| DA11183 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "4" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186A) |
|
|
 |
| DA11184 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "5" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186B) |
|
|
 |
| DA11185 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "6" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186F) |
|
|
 |
| DA11186 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "7" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186G) |
|
|
 |
| DA11187 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "8" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186J) |
|
|
 |
| DA11188 | $15.27 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo "9" Individual placement number in RED. Designed so that you can make your own engine size emblem. Made of top quality die-cast chrome plating. Approx. size is 1 3/8 inch long by 5/8 inch high. No holes to drill to attach. - each (Trim Parts 5186H) |
|
|
 |
| DA10112 | $8.47 | | | 1968 Chevelle, Malibu, and El Camino Front side marker lens LH or RH Clear Lens - Correct for 68 (Trim Parts A3070) |
|
|
| |
| DA10113 | $8.47 | | | 1968 Chevelle, Malibu, and El Camino Front side marker lens LH or RH Amber Lens - (Trim Parts A3071) |
|
|
 |
| DA11150 | $73.47 | | | 1968 Chevelle Front Fender Side Marker Light Bezel 307 (sold as pairs) (Trim Parts 4520) |
|
|
 |
| DA11151 | $73.47 | | | 1968 Chevelle Front Fender Side marker Light Bezel 327 (sold as pairs) (Trim Parts 4521) |
|
|
 |
| DA11152 | $73.47 | | | 1968 Chevelle Front Fender Side Marker Light Bezel 350 (sold as pairs) (Trim Parts 4522) |
|
|
 |
| DA11153 | $73.47 | | | 1968 Chevelle Front Fender Side Marker Light Bezel 396 (sold as pairs) (Trim Parts 4523) |
|
|
 |
| DA11154 | $73.47 | | | 1968 Chevelle Front Fender Side Marker Light Bezel 427 (sold as pairs) (Trim Parts 4524) |
|
|
| |
| DA11159 | $84.07 | | | 1968 Chevelle Front Fender Side Marker Light Bezel 427 in RED (sold as pairs) (Trim Parts 4524A) |
|
|
| |
| DA10116 | $39.00 | | | 1969 Chevelle Front side marker light lens ( Amber ) LH & RH set - OEM |
|
|
 |
| DA11155 | $81.60 | | | 1969 Chevelle Front Fender Side Marker Light Bezel 250 (sold as pairs) (Trim Parts 4605) |
|
|
 |
| DA11156 | $81.60 | | | 1969 Chevelle Front Fender Side Marker Light Bezel 307 (sold as pairs) (Trim Parts 4606) |
|
|
 |
| DA11157 | $71.40 | | | 1969 Chevelle Front Fender Side Marker Light Bezel 350 (sold as pairs) (Trim Parts 4607) |
|
|
| |
| DA10118 | $39.95 | | | 1970 Chevelle Front Fender Side Marker light assmebly - LH & RH (D-L70F) |
|
|
| |
| DA10147 | $6.00 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo Body shims, 6mm, 10 pcs |
|
|
 |
| DA10148 | $6.00 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo Body shims, 3mm, 10 pcs |
|
|
 |
| DA10149 | $6.00 | | | 1968-1988 Chevelle, Malibu, El Camino, Monte Carlo Body shims, 1.6mm, 10 pcs |
|
|
| |
| DA10134 | $7.00 | | | 1970-1972 Chevelle /El Camino Front fender braces - each (need one per fender) |
|
|
 |
| DA10122 | $339.00 | | | 1968 Chevelle & El Camino LH Fender reproduction (D-1479B) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10123 | $339.00 | | | 1968 Chevelle & El Camino RH Fender reproduction (D-1479A) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10124 | $339.00 | | | 1969 Chevelle & El Camino LH Fender reproduction (D-1479D) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10125 | $339.00 | | | 1969 Chevelle & El Camino RH Fender reproduction (D-1479C) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10126 | $269.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) LH - Fender (D-1481) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10127 | $269.00 | | | 1970 Chevelle and Malibu ( except Wagon /El Camino ) RH - Fender (D-1480) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10128 | $269.00 | | | 1971-1972 Chevelle and Malibu ( except Wagon /El Camino / Sprint ) LH - Fender (D-1483) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10129 | $269.00 | | | 1971-1972 Chevelle and Malibu ( except Wagon /El Camino / Sprint ) RH - Fender (D-1482) (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10130 | $329.00 | | | 1970 Chevelle Wagon /El Camino LH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse. ) |
|
|
| |
| DA10131 | $329.00 | | | 1970 Chevelle Wagon /El Camino RH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10230 | $49.00 | | | 1970 Chevelle, Malibu, El Camino Front fender extension - LH (GS-FE03-70EL) |
|
|
 |
| DA10231 | $49.00 | | | 1970 Chevelle, Malibu, El Camino Front fender extension - RH (GS-FE03-70ER) |
|
|
| |
| DA10365 | $19.95 | | | 1970 Chevelle /El Camino Fender Extension Hardware Kit ( 34 pieces ) |
|
|
| |
| DA10132 | $329.00 | | | 1971-1972 Chevelle Wagon /El Camino / Sprint LH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10133 | $329.00 | | | 1971-1972 Chevelle Wagon /El Camino / Sprint RH - Fender (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10330 | $199.00 | | | 1971-1972 Chevelle, Malibu, El Camino Front fender extension - LH (GS-FE03-71EL) |
|
|
| |
| DA10331 | $199.00 | | | 1971-1972 Chevelle, Malibu, El Camino Front fender extension - RH (GS-FE03-71ER) |
|
|
| |
| DA10166 | $5.95 | | | 1971-1972 Chevelle /El Camino Fender Extension Hardware Kit ( 12 pieces ) |
|
|
| |
| DA10167 | $5.95 | | | 1971-1972 Chevelle /El Camino Fender Extension Top Bracket Hardware Kit (4-pieces) |
|
|
| |
| DA10136 | $22.00 | | | 1970-1972 Chevelle and Malibu (except Wagon/El Camino/Sprint) LH Lower rear fender Patch Panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
| |
| DA10137 | $22.00 | | | 1970-1972 Chevelle and Malibu (except Wagon/El Camino/Sprint) RH Lower rear fender Patch Panel (SHEET METAL DISCLAIMER: Unlike all of our competitors, we want to be honest about parts we sell. We all have basically the same sources for parts. All cars are different. No two cars are ever alike. Even though we have had very good results with these parts, there is no way can guarantee that parts will fit your car exactly. You may have to make the part fit your car just as GM did by hand years ago. You must sign for motor freight items. Please inspect items before receiving them for damage and note them on the drivers bill. Once you sign for them that they are in good condition, they are yours with no recourse.Sheet metal is not returnable to us for any reason. You have to make your own claim with the freight carrier if damage is involved. ) |
|
|
 |
| DA10213 | $99.00 | | | 1968-1972 Chevelle, Malibu, El Camino Steel front inner fender - LH (GS-IF03-68L) |
|
|
 |
| DA10214 | $99.00 | | | 1968-1972 Chevelle, Malibu, El Camino Steel front inner fender - RH (GS-IF03-6R) |
|
|
 |
| DA10215 | $79.00 | | | 1968-1972 Chevelle, Malibu, El Camino Plastic front inner fender - LH (D-1472U) |
|
|
 |
| DA10217 | $79.00 | | | 1968-1972 Chevelle, Malibu, El Camino Plastic front inner fender - RH (D-1472T) |
|
|
